Equipment Description

• Model：Psur-100HC

Function and use

1.  Thin film deposition (the laboratory provides targets: Al, Ti, Cu, ITO, Al2O3, SiO2, please prepare other targets by yourself)
2.  Gas Ar, O2, N, NH3, H2 can be introduced
3.  Multi-gun consists of 1 set of DC power supply (1000W output) and 2 sets of RF power supply (1200W output), which can be co-plated, including Maching Box, digital display and control panel
4.  The base pressure is about 5E-6 torr, and the minimum operating pressure can reach 2 mtorr during sputtering

Equipment Specifications and Applicable Substrates

•  non-uniformity：< 10%
•  Target specification：4”
•  2”, 3”, 4”, 6” substrates and fragments

Service Notice

1. The equipment can be opened for self-operation during non-holiday days after passing the assessment.
2. Self-operators must sign up for <<Industrial Safety and Instrument Training>> and <<Instrument Certification>> on the website, and hang in “a. Basic user information”, “b. Laboratory user safety commitment statement and health notify” form after passing the two courses. Next you will be able to apply for the clean room identification certificate and magnetic card, then enter the clean room to operate the equipment.
3. Those who operate on their own for 15 hours during the day are able to operate at night and on holidays.
4. The service of this system takes 0.25 hours as a unit.
5. The delegated operation is uniformly open on Wednesdays from 09:00 to 17:00. Please confirm the time period with the instrument technician first, and then go online to make an appointment for the delegation time. If the delegation time is not on Wednesday, the fee will be charged double as a rush.
6. Cancellation must be done 1 day in advance, otherwise the usage fee will be charged in full according to the reservation time.
7. If the actual hours used are less than the reserved hours, and the difference between these two periods is more than 1 hour, the rest of the time will be calculated at 50% of the unit price.
8. If you use the equipment without a reservation, you will be charged 1.5 times.
9. Those who pass the assessment but have no record of self-operation for 6 consecutive months will be disqualified for self-operation. If you need self-operation in the future, additional application, training, and assessment will be required, only the fee will be charged at half price.

Charge

1.  Project:  $250/0.25 hours for self-operation; $420/0.25 hours for delegated operation

Instrument training fee: $1100/class, instrument certification fee: $600/class

2.  Non-project: $450/0.25 hours for self-operation; $500/0.25 hours for delegated operation

Instrument training fee: $1100/class, instrument certification fee: $600/class

Notices of Specimens

• The instrument is currently using a room temperature process.
• If there is a problem while operating, please notify the relevant personnel (for example, notify the factory staff if the process gas pressure is not enough, notify the technician if it’s the instrument or other problems)
• Hydrogen is temporarily closed to general users. If you want to use hydrogen, please delegate an instrument technician to operate it.
• If self-operators need to use their own targets, they must inform the instrument technician of the target material composition and target material characteristics before making an appointment, and then make an online appointment only after the instrument instructor agrees.
• Once the instrument technician finds out that the instrument is damaged or malfunctioning, those who do not fill in the record book correctly will be suspended for two weeks for the first time. And re-examination will be performed if it’s the second time. Besides, if the equipment is damaged due to improper operation by human factors, the person will be responsible for compensation for maintenance costs.
• For delegated operators, please contact the technician to confirm the delegated time period before going online for an appointment.

Contact Detail